Codes & materials
Design standards and National Annex, materials, and cross-sections actually assigned in the model.
SKL-000057 · Skill
A comprehensive, read-only description of your RFEM model
Reads the RFEM model you currently have open and reports its standards, materials, geometry, bracing, loads, and load zones in plain text. Nothing is changed and no design verdict is given.
Mia guides you step by stepShe guides you through the inputs and explains the results.
Worked example
Full RFEM model report
- Standards
- Read from the model's base data (e.g. EN 1993-1-1, EN 1998-1)
- Materials & cross-sections
- Every material and cross-section actually assigned in the model
- Snow / wind load zones
- Reconstructed from the assigned load cases, where determinable
- Seismic analysis
- Detected automatically; governing input parameters are reported if present
Describe the RFEM model that is currently open. Include standards and National Annex (yes), materials (yes), cross-sections (yes), overall dimensions (yes), bracing in X-direction (yes), bracing in Y-direction (yes), object counts (yes), load cases and combinations (yes), snow load zone (yes), wind load zone (yes), seismic analysis and its inputs (yes), active add-ons (yes), analysis settings (yes), support overview (yes), and calculation status (yes).
Calculate the example with MiaRequired inputs
- An RFEM model open and connected via the Dlubal Connector
What you receive
- Design standards and National Annex in use
- Materials and cross-sections assigned in the model
- Overall dimensions and bracing in X- and Y-direction
- Snow and wind load zones, where determinable
- Whether a seismic analysis was performed, and its governing inputs
Reviewed calculation example
Start from an input template
These templates prefill the form with typical inputs. They are not calculated results; the calculation runs in CALC.
Prepare your calculation
Choose what to include in the report
System sketch
Yes
Yes
Yes
All required fields completed
Yes
Yes
Yes
Yes
Yes
All required fields completed
Yes
Yes
Yes
Yes
Yes
Yes
Yes
All required fields completed
Inputs completeReady to calculate
What this skill checks
Geometry & structure
Overall dimensions, bracing in X- and Y-direction, object counts, and the support/boundary-condition overview.
Loads & analysis
Load cases, combinations, and action categories; snow and wind load zones where determinable; seismic analysis and its governing inputs if present; active add-ons and analysis settings.
Frequently asked questions
Frequently asked questions
ScopeDoes this skill run a calculation or a design check?
No. It only reads the model's existing definition. Use 000004-rfem-model-analyze to calculate the model or 000005-rfem-model-design for design checks and utilisations.
InputsWhat happens if no RFEM model is open?
The skill reports that no connected model was found and points to the Dlubal Connector setup instead of guessing at model content.
Ready for your first check?
Start with the example and adapt it to your structural system.
New calculation